Sist oppdatert:

Du må registrere deg for en ExpressVPN-konto for å bruke appene og konfigurasjonene våre.

Certain streaming services function more reliably if you block specific IP addresses on your router.

This guide will show you how to block specific IP addresses on DD-WRT routers.

To block specific IP addresses on your DD-WRT router, you will need to use static routing rules to ensure your network traffic does not flow through the IP addresses you specify.

Jump to…

1. Sign in to your router admin panel
2. Change your router network settings
Check if the IP addresses are blocked

1. Sign in to your router admin panel

To access your router admin panel, open a web browser and enter 192.168.1.1 into the address bar.

Sign in with your username and password (by default, the username is root and the password is admin). If your router’s IP address was changed in the past and you cannot remember it, you can find it in your device’s settings.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top

2. Change your router’s network settings

In the top navigation bar of your router admin dashboard, click Setup > Advanced Routing.

Click “Advanced Routing.”

Under Static Routing, enter the following:

  • Select set number: Select 1 ( ).
  • Route Name: Enter a name that will help you recognize this route.
  • Metric: Enter 2.
  • Masquerade Route (NAT): Check this box.
  • Destination LAN NET: Enter the IP address you wish to block.
  • Subnet Mask: Enter 255.255.255.255.
  • Gateway: Enter your router’s default IP. (You can find it in your device’s settings)
  • Interface: Select LAN & WLAN.

Click Save > Apply Settings.

Click “Apply Settings.”

You may need to block a few more IP addresses, depending on which streaming service you are using. To learn more about which IP addresses to block, contact the ExpressVPN Support Team.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top

Check if the IP addresses are blocked

To check if you have successfully blocked the IP address, open the command line system on your computer:

  • Mac: Terminal
  • Windows: Command Prompt

Enter “ping” and the IP address you have blocked, e.g.,
ping 192.123.123.123

If you have successfully blocked the IP address, you will see “Request timeout” or “Destination Host Unreachable” on the next few lines.

Ping result on Terminal.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top

Var denne artikkelen nyttig?

Det var leit å høre. Fortell oss hvordan vi kan bli bedre.

Which router model do you need help with?

Examples: Linksys WRT1200AC, Asus RT-AC56R

Et medlem i støtteteamet vårt vil se på saken din snart.